• img1
  • img2
  • img3

+86-571-82793342

hzxscyhdc@126.com

Product Categories

Contact Us

Hangzhou Xiaoshan Chuangye Metal Processing Factory

Add:Zixia Village, Xintang Street, Xiaoshan District, Hangzhou City, Zhejiang Province, China

Contact:Yali Yu

Tel:86-571-82793342

Fax:86-571-82778852

Mobile:86-13967182887

E-mail:ada.huang@hzxscy.cn


Home > News > Content
Hand Wheel Common Faults And Troubleshooting Methods

Hand wheel common faults and troubleshooting methods

Hand wheel full manual pulse generator, also known as photoelectric encoder. Mainly used for CNC machine tools: CNC vertical machining center, horizontal machining center, Longmen processing center, such as novel design, convenient movement, anti interference, strong carrying capacity; the plastic casing, insulating high strength, anti oil seal design; X1, X10, X100 third rate, can realize 4 axis rate switch; have a control switch, emergency stop switch is optional, human design, easy to operate.

1, the use of crank shafts appear jitter phenomenon. It turns out that there is a problem with the circuit board in the hand wheel box and replace the damaged components

2, hand wheel sometimes easy to use, sometimes difficult to use, there is no rule, the original hand wheel or hand wheel extension line resistance is too large, replace the spare line problem solved

3, hand wheel reaction is not sensitive, there is a serious pulse loss phenomenon, the plug is at the junction of the pin is not in place

4, the hand wheel can not be used, the original signal line for small plug A/B, that is, X1/X2 inserted back

5, the hand wheel can not be used or the hand wheel appear pulse loss phenomenon, the original is Cable Splitter skipping wrong, should jump on either side, Cable Splitter DIP--FIX switch (S1--S6) is set as follows

6, the hand wheel can not use or hand wheel appear pulse loss phenomenon, signal cable 6FX2002-4AA21-0xx0, appear broken line or virtual connection

7, the hand wheel can not be used, the original pulse generator is broken, can only be replaced

Hangzhou Xiaoshan Chuangye Metal Processing Factory

Add:Zixia Village, Xintang Street, Xiaoshan District, Hangzhou City, Zhejiang Province, China

Contact us:Yali Yu

Tel:86-571-82793342

Fax:86-571-82778852

Mobile:86-13967182887

E-mail:hzxscyyali@126.com


Contact Us
Hangzhou Xiaoshan Chuangye Metal Processing Factory

Address: Zixia Village, Xintang Street, Xiaoshan District, Hangzhou City, Zhejiang Province, China

Tel: +86-571-82793342

Fax: 86-571-82778852

E-mail: hzxscyhdc@126.com

Copyright © Hangzhou Xiaoshan Chuangye Metal Processing Factory All rights reserved.
foottop