• img1
  • img2
  • img3

+86-571-82793342

hzxscyhdc@126.com

Product Categories

Contact Us

Hangzhou Xiaoshan Chuangye Metal Processing Factory

Add:Zixia Village, Xintang Street, Xiaoshan District, Hangzhou City, Zhejiang Province, China

Contact:Yali Yu

Tel:86-571-82793342

Fax:86-571-82778852

Mobile:86-13967182887

E-mail:ada.huang@hzxscy.cn


Home > News > Content
Stamping Handwheel Is Favored By Customers

Stamping handwheel with one-time steel stamping, with a beautiful appearance, delicate touch, convenient and durable characteristics, belonging to the use of environmentally friendly products. The handwheel through destructive testing and mechanical strength detection, a variety of performance far superior to the traditional cast iron, cast steel valve handwheel, widely used in a variety of valves: diameter from the 80mm-500mm, Stamping Hand Wheel the inner hole to provide standard square hole, hexagonal, round hole and other options. Product color bright, beautiful and durable, greatly enhance the added value of ancillary products, Stamping Hand Wheel widely used in valves and light industry machinery industry, by customers love and praise.

The stamping handwheel has the advantages of stable transmission, accurate transmission ratio, reliable operation, high efficiency, long life, and large range of power, speed and size.

Stamping handwheel looks beautiful, design standard, durable, inexpensive

Stamping Handwheel We should be installed in accordance with the schematic diagram to install, there are many manufacturers because of improper installation, resulting in some of the hand wheel damage, and the use of life of some operations, below we explain some of the stamping hand wheel installation tips,. Stamping Hand Wheel When the instrument flowchart has specific requirements for certain valve installation locations, it should be set according to process requirements. The type of valve handwheel and the level of temperature and pressure should be selected according to the grade of piping material in each engineering regulation. The valve in the installation area shall be arranged in a place accessible, easy to operate and maintained. The valves on the piping should be arranged centrally, Stamping Hand Wheel and the operation platform or ladder should be considered.

The valve installed in the trench, when opening the trench cover plate can operate, the valve handwheel should not be lower than the trench cover plate under 300mm, when below 300mm, Stamping Hand Wheel should set the valve elongation bar, so that its handwheel in the trench cover plate under 100mm within.

Note that for some of the valves that do not often operate the handwheel, Stamping Hand Wheel the valve should be well maintained for the purpose of increasing the service life.

The 2nd is that for less than equal to DN40 and screw connection of the valve should not use sprocket or elongation rod operation, lest damage valve.

Hangzhou Xiaoshan Chuangye Metal Processing Factory

Add:Zixia Village, Xintang Street, Xiaoshan District, Hangzhou City, Zhejiang Province, China

Contact us:Yali Yu

Tel:86-571-82793342

Fax:86-571-82778852

Mobile:86-13967182887

E-mail:hzxscyhdc@126.com


Contact Us
Hangzhou Xiaoshan Chuangye Metal Processing Factory

Address: Zixia Village, Xintang Street, Xiaoshan District, Hangzhou City, Zhejiang Province, China

Tel: +86-571-82793342

Fax: 86-571-82778852

E-mail: hzxscyhdc@126.com

Copyright © Hangzhou Xiaoshan Chuangye Metal Processing Factory All rights reserved.
foottop