The function of the pneumatic control valve handwheel is relatively large. The handwheel mechanism is used in conjunction with the regulating valve, and the main uses are as follows:
1 When the air source signal or electrical signal fails, or when the main components of the actuator (such as diaphragm, spring, seal, transmission, etc.) are damaged, the automatic operation should be changed to manual operation, and the handwheel can be used. The mechanism continues to maintain the regulating function of the regulating valve.
2 The handwheel can also be used as a limiter for regulating valve stroke. (Limit function)
3 The handwheel mechanism can improve the reliability of the operation of the regulating valve. If a bypass is added to the regulating valve, investment is required.
The cost is large, the area is large, and the cost is higher when the caliber is large or when precious metals are used. It is more cost-effective to use the handwheel mechanism regardless of the investment cost or floor space.
In addition, for single-acting diaphragm valves, the role and mode of action of the handwheel (the direction of action of the valve) are directional. At the same time, diaphragm-action valves are generally used in places where the process pressure is relatively small and the closing requirements are not harsh, and the force is not very large. Therefore, it is enough to install the handwheel directly, without the need to design labor-saving device handwheels (except for special ones), and it is not realistic to use bolts. The bolts are generally used on double-acting, piston-type actuators. The double-acting valve is not necessarily the case. The wide-ranging double-acting valve is generally an arbitrary handwheel that can be opened and closed.





