Terms: Handwheel
Word meaning: the wheel of the hand operation.
Handwheel common faults and troubleshooting methods
1. The shaking phenomenon occurs on each axis of the hand crank. It turns out that there is a problem with the circuit board inside the hand wheel box, and the damaged components are replaced.
2, the hand wheel is sometimes easy to use, sometimes it is not easy to use, there is no law, the original is the internal resistance of the hand wheel or the extension of the handwheel is too large, the problem of replacing the spare line is solved.
3, the hand wheel reaction is not sensitive, there is a serious pulse loss phenomenon, the original pin is not in place at the plug connection
4, the hand wheel can not be used, the original plug of the signal line A / B that is X1/X2 plugged in reverse
5, the hand wheel can not be used or the hand wheel has a pulse loss phenomenon, the original cable splitter jump pin is wrong, should jump between the two sides to stay in the middle, cable splitter DIP--FIX switch (S1--S6) settings as follows
6, the hand wheel can not be used or the hand wheel has a pulse loss phenomenon, the signal cable 6FX2002-4AA21-0xx0, there is a broken line or virtual connection
7, the hand wheel can not be used, the original pulse generator is broken, can only be replaced
Hangzhou Xiaoshan Chuangye Metal Processing Factory
Add:Zixia Village, Xintang Street, Xiaoshan District, Hangzhou City, Zhejiang Province, China
Contact us:Yali Yu
Tel:86-571-82793342
Fax:86-571-82778852
Mobile:86-13967182887
E-mail:ada.huang@hzxscy.cn
