Stamping hand wheel is also called hand wheel pulse generator. It is mainly used in CNC machine tools, machining centers and other CNC equipment. It is characterized by convenient operation, high insulation strength, anti oil sealing, anti-interference and so on. Next, I will give you a brief introduction of the important indicators of the hand wheel, such as the lower stamping hand wheel.
1. General appearance of Ben photoelectric encoder: 38mm, 58mm, 66mm, 80mm.100mm.
2. Ben photoelectric encoder is divided into: single turn, multi turn.
3. According to the principle, Ben encoder can be divided into sub absolute encoder and photoelectric encoder.
4. The outgoing mode of Ben photoelectric encoder is divided into: side appears, rear outgoing.
5. Ben optical encoder shaft is divided into: 6mm, 8mm, 10mm, 12mm, 14mm, 25mm.
6. Ben photoelectric encoder is divided into: shaft, busy hole, through hole.
7. The protection of Ben optical encoder is divided into ip54-68.
8. The installation method of Ben photoelectric encoder includes: clamp flange, flange copper step, tightening and synchronizing flange, through hole, etc.
9. The accuracy of Ben absolute value encoder can be divided into single circuit and multi quantity accuracy. Combined with the total accuracy, the general number of bits (24, 25, 30, 32...).
10. Ben absolute encoder communication protocol frequency: 4800 ~ 115200 bits / second, baud rate: 9600 bits / second. The refresh period is about 1.5ms.
11. Ben encoder output options: 4-20mA, RS485, SSI, PROFIBUS-DP, DeviceNet, parallel, two gold codes, ISI, CANopen, BISS, EnDat, hiperface, etc.
12. Ben encoder types: be420sm58-no11k2r, be622sm58-n011k2r, be1822sm58-n011k1r07, be1322sm58-n011k2rr13, be122sm58-n011k1r2, be1622sm58, be322sm58, beh26m.
