In every link of industrial production, Stop Valve plays an irreplaceable role as a key component for controlling the on and off of fluids. Hand Wheel in Stop Valve is the direct operating component for operators to realize valve opening and closing control. Recently, the problem of Hand Wheel in Stop Valve operating force being too large and exceeding the design range has frequently appeared in many industries that rely on pipelines to transport fluids, such as chemical, petroleum, and electricity, which has aroused widespread attention and heated discussions.
Table of contents
1. The current status of the problem is prominent and has a wide impact
2. Cause exploration: multiple factors are intertwined
3. Response strategy: multi-pronged approach
4. Industry outlook: technological innovation and standard improvement
1. The current status of the problem is prominent and has a wide impact

Stop valves are widely used in industrial pipeline systems, from chemical raw material pipelines to process pipelines of oil refining units to steam and water circulation pipelines of power plants. Under normal circumstances, operators should be able to easily turn the Hand Wheel in Stop Valve to achieve precise control of the fluid. But now, many front-line operators have reported that turning the hand wheel has become extremely laborious, and the operating force far exceeds the design standard.
In some large chemical companies, workers need to work together with two people or even use auxiliary tools to turn the hand wheel during daily inspections and valve operation. This not only greatly increases the labor intensity of operators, prolongs the operation time, and reduces work efficiency, but also in emergency situations, it may cause serious safety accidents due to the inability to operate the valve in time. For example, in a chemical reaction device, if an emergency situation requires emergency closure of the stop valve, excessive operating force may delay the closure time, cause material leakage, and then cause environmental pollution, and even endanger the safety of personnel.
2. Cause exploration: multiple factors are intertwined
1. Abnormal friction between valve stem and seal
Aging and deformation of seal: The seals in stop valves are mostly made of rubber, polytetrafluoroethylene and other materials. Under long-term fluid erosion, temperature changes and chemical medium erosion, the seals are prone to aging and deformation. The aged seals will lose their original elasticity and flexibility, and the friction between the valve stem will increase significantly. For example, in high-temperature and high-pressure steam pipelines, rubber seals may show obvious aging and hardening after one year of use, which increases the resistance when the valve stem rotates, and then causes the operating force of the Hand Wheel In Valve to increase.
Improper installation causes the seal to be too tight: Some companies do not strictly follow the installation specifications when installing stop valves, and install the seals too tightly. This will cause the valve stem to always bear excessive lateral pressure during movement, exacerbating the friction between the valve stem and the seal. According to the survey, about 30% of the cases of excessive operating force are caused by improper installation of seals. In some small factories, due to the lack of professional installation personnel and specifications, such problems are particularly prominent.
2. Media influence and impurity accumulation
Media viscosity and corrosiveness: If the medium transported in the pipeline has high viscosity, such as some high-viscosity petroleum products or chemical slurries, the medium will adhere to the valve stem and sealing surface during the opening and closing of the valve, increasing the rotation resistance. At the same time, the corrosive medium will corrode the valve stem and seal, making its surface rough and further increasing the friction coefficient. In the wastewater treatment pipeline of the printing and dyeing industry, due to the large amount of chemicals and impurities in the wastewater, the erosion of the stop valve is more serious, often resulting in excessive operation force of the Hand Wheel in Stop Valve.
Impurity accumulation and blockage: During the operation of the pipeline system, impurities will inevitably be mixed in. When these impurities accumulate on the valve seat and valve stem of the stop valve, they will hinder the normal movement of the valve stem. For example, in some water source pipelines that have not been strictly filtered, impurities such as silt and rust can easily enter the stop valve. After a long period of accumulation, the operation of the valve becomes extremely difficult.
3. Valve structure and design defects
Irrational valve stem structure: The valve stem design of some stop valves is defective, such as the valve stem diameter is too small, which is easy to deform when subjected to large operating torque, thereby increasing friction with other parts. In addition, if the thread design of the valve stem is unreasonable, it will also lead to unsmooth rotation and increased operating force. Some old models of stop valves, due to their early design, the valve stem structure can no longer meet the needs of modern industrial production.
Insufficient lubrication design: Good lubrication of the valve is the key to ensuring its smooth operation. However, when designing some stop valves, insufficient consideration is given to lubrication, too few lubrication points are set, or the lubrication method used is not suitable for actual working conditions. For example, some stop valves working in harsh outdoor environments, if lubricated with ordinary lubricating oil, will become viscous in low temperature environments, lose the lubrication effect, and cause excessive operating force.
3. Response strategy: multi-pronged approach
1. Strengthen maintenance and regular inspection and replacement
Develop a maintenance plan: Enterprises should develop a detailed stop valve maintenance plan based on the characteristics and operating conditions of their own pipeline systems. For example, for stop valves in chemical pipelines, it is recommended to conduct a comprehensive inspection every quarter, including the status of seals, wear of valve stems, and accumulation of impurities.
Replace wearing parts in a timely manner: Once problems such as aging of seals and wear of valve stems are found, the corresponding parts should be replaced in a timely manner. At the same time, select seals and valve stems with reliable quality and excellent performance to improve the service life and operating performance of the valve. For example, new high-performance rubber seals can be used, which have better aging and corrosion resistance and can effectively reduce the friction between the valve stem and the seal.
2. Optimize media processing and improve the operating environment
Strengthen media filtration: Install high-efficiency filters in the pipeline system to strictly filter the transported media and reduce the possibility of impurities entering the stop valve. For example, in oil pipelines, filters with multi-layer filters can effectively filter out impurities such as silt and rust, reducing the impact of impurities on the valve.
Adjust medium parameters: For media with high viscosity or strong corrosiveness, the adverse effects on the valve can be reduced by adjusting the medium's temperature, concentration and other parameters. For example, when conveying high-viscosity chemical slurry, appropriately increasing the slurry's temperature can reduce its viscosity, thereby reducing adhesion to the valve stem.
3. Improve valve design and selection
Optimize valve structure: Valve manufacturers should increase R&D investment and improve the structural design of stop valves. For example, use a thickened valve stem to improve the strength and deformation resistance of the valve stem; optimize the thread design of the valve stem to make the rotation smoother. At the same time, reasonably increase the lubrication points and adopt more advanced lubrication methods, such as automatic oil filling devices, to ensure that the valve is always well lubricated during operation.
Reasonable selection: When purchasing stop valves, enterprises should reasonably select the type and specification of valves according to actual working conditions. For example, for high temperature, high pressure and highly corrosive media conditions, stop valves made of special materials that are resistant to high temperature and corrosion should be selected, and their operating force should be ensured to meet the design requirements.
4. Industry outlook: technological innovation and standard improvement
The emergence of the problem of excessive operating force of Valve Hand Wheels has sounded the alarm for the entire industry. On the one hand, it has prompted enterprises to pay more attention to the maintenance and management of equipment and improve the professional skills and safety awareness of operators. On the other hand, it has also prompted valve manufacturers to increase their efforts in technology research and development, and continuously improve the performance and quality of stop valves through technological innovation.
In the future, with the continuous development of material science, manufacturing technology and automation control technology, more advanced, efficient and reliable stop valve products are expected to appear. At the same time, industry standards will be further improved, and more stringent requirements will be put forward for each link of stop valve design, manufacturing, installation, maintenance, etc. to ensure the safe and stable operation of industrial pipeline systems. Through the joint efforts of all parties in the industry, it is believed that the problem of excessive operating force of Hand Wheel in Stop Valve will be effectively solved, providing a strong guarantee for the sustainable development of industrial production.





